Labels - Guardian Fall Protection Edge Series Instruction Manual

Labels

death.
USE:
No free fall is allowed. SRL must always be
positioned at or above harness D-ring. Avoid
lifeline contact with sharp edges. For use by
trained persons only. Ensure connection to
anchorage is secured properly before use.
Not suitable for horizontal use. May be
used as a component of a PFAS in HLL
applications. Design, installation and
utilization of HLLs must be supervised by a
7
Part #
10900
WARNING:
Manufacturer's
instructions supplied with this
product at time of shipment
must be read prior to use.
Instructions must be followed
for proper use, maintenance and
inspection. Alterations or misuse
of this product or failure to follow
instructions may result in serious injury or
NOT USER REPAIRABLE! DO NOT
REMOVE THIS LABEL!
Qualified Person.
Date of first use
90043
(Rev. D)
Serial #
INSPECTION:
Before each use
inspect device per user manual
including locking function
(pull sharply to test), retraction
function, lifeline function,
function and condition of
connectors, housing and fasteners,
legibility of labels, and any evidence of defects,
damage, or missing parts. Inspection by a
Competent Person required at least every 6
months. Inspect shock absorber for signs of
previous deployment or load. Torn or stretched
plastic on shock pack is an indication that an
impact has occurred and the unit must be removed
from service. If used to arrest the fall, remove from
service. Do not use if inspection reveals an
unsafe condition. Powerful spring inside, do
not remove covers.
STANDARDS:
OSHA 1910, 1926 Subpart M
ANSI Z359.14-2012, A10.32-2012
SPECIFICATIONS:
Average locking speed: 4.5 ft./Sec.
Maximum arresting distance: 54 in.
Average arresting force: 900 lbs.
Maximum capacity: 130 - 310 lbs.,
or up to 420 lbs. * see instructions
Webbing: 11' Nylon, 7/8" width
Class B SRL
Mfg. Date (mo/yr)
85042 (Rev. G)