Related Manuals for Guardian Fall Protection 00260
Summary of Contents for Guardian Fall Protection 00260
-
Page 1: Table Of Contents
Product Name: Angel Anchor Part #: 00260 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications 1 - 2 Limitations 2 - 3 Components and Specifications... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Angel Anchor. This manual must User Information be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any Date of First Use: applicable state agency. -
Page 3: Limitations
Restraint: Angel Anchor may be used in Restraint applications. Restraint systems prevent workers from reaching the leading edge of a fall hazard. Always account for fully deployed length of lanyard/SRL. Structure must withstand loads applied in the directions permitted by the system of at least 1,000 lbs. -
Page 4: Components And Specifications
Incompatible Connector or irregular directly to application, horizontal which may lifeline. increase risk of roll-out. Two or more snap hooks or carabiners connected to each other. Correct Anchorage Positioning: This chart details allowable working zones required to reduce risk of swing falls and improper side loading. ALWAYS adhere to information specified by chart. -
Page 5: Installation And Use
Installation and Use Prior to installation, plan your system: 1. Determine suitable location for anchor; ensure location is free of debris, rot, decay, cracking, and hazardous materials. Only use Angel Anchor on the following approved substrates: • EPDM membrane • Torch down (smooth) • Torch down (granulated) • Cement • Wood • TPO • Vinyl • PVC Ensure Angel Anchor Weighted Pads have wear-resistant natural gum foam rubber padding affixed prior to use. -
Page 6: Maintenance, Cleaning, And Storage
Maintenance, Cleaning, and Storage If Angel Anchor fails inspection in any way, immediately remove it from service, and contact Guardian to inquire about its return or repair. Cleaning after use is important for maintaining the safety and longevity of Angel Anchor. Remove all dirt, corrosives, and contaminants from Angel Anchor before and after each use. -
Page 7: Safety Information
Safety Information Failure to understand and comply with safety regulations may result in serious injury or death. Regulations included herein are not all-inclusive, WARNING are for reference only, and are not intended to replace a Competent Person’s judgment or knowledge of federal or state standards. Do not alter equipment. -
Page 8: Labels
Labels Angel Anchor www.guardianfall.com 1-800-466-6385 Part # 00260 Date of Manufacture: Prior to use, read and understand all manufacturer’s instructions provided with equipment at time of shipment. Compliant with all EN 795-2012 regulations. Capacity range: 130-220 lbs. Materials: galvanized steel. Type E.
Need help?
Do you have a question about the 00260 and is the answer not in the manual?
Questions and answers