Table of Contents
Related Manuals for Guardian Fall Protection 00432
Summary of Contents for Guardian Fall Protection 00432
-
Page 1: Table Of Contents
Product Name: Truss Boss Anchor Part #: 00432; 00420; 00422; 00440; 00441; 00442 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment! Introduction Applicable Safety Standards Worker Classifications Product Specific Applications Limitations 2 - 3... -
Page 2: Introduction
Introduction Thank you for purchasing a Guardian Fall Protection Truss Boss Anchor. This manual must be read and understood in its entirety, and used as part of an employee training program as required by OSHA or any applicable state agency. -
Page 3: Product Specific Applications
Product Specific Applications Use of equipment in unintended applications may result in serious WARNING injury or death. Maximum 1 attachment per connection point. Personal Fall Arrest: Truss Boss Anchor may be used to support a MAXIMUM 1 Personal Fall Arrest System (PFAS) for use in Fall Arrest applications. - Page 4 Compatibility: When making connections with Truss Boss Anchor, eliminate all possibility of roll-out. Roll-out occurs when interference between a hook and the attachment point causes the hook gate to unintentionally open and release. All connections must be selected and deemed compatible with Truss Boss Anchor by a Competent Person.
-
Page 5: Components And Specifications
Point Flashing Anchor Cap Fastener Installation Location (8 total) Part # Description 00432 Truss Boss Anchor 00420 Truss Boss Anchor Kit (Includes Weather Proof Cap & Flashing) 00422 Truss Boss Anchor Cap 00440 Tile Truss Boss Anchor Kit - Gray... -
Page 6: Maintenance, Cleaning, And Storage
*Shown without Installation: Flashing/Anchor Cap 1. Place Truss Boss Anchor over selected installation application. Truss Boss Anchor must lie flush with substrate. Connection 2. Install (8) provided nails in fastener installation locations Point on Truss Boss Anchor. All (8) nails must be fully embedded in All (8) fasteners substrate and sit flush against anchor. -
Page 7: Safety Information
Inspection Log Date of First Use: __________________. Product lifetime is indefinite, as long as it passes pre-use and Competent Person inspections. User must inspect prior to EACH use. Competent Person other than user must complete formal inspection at least every 12 months. Competent Person to inspect and initial. -
Page 8: Labels
Training of Authorized Persons to correctly erect, disassemble, inspect, maintain, store, and use equipment must be provided by a Competent Person. Training must include the ability to recognize fall hazards, minimize the likelihood of fall hazards, and the correct use of personal fall arrest systems. NEVER use fall protection equipment of any kind to hang, lift, support, or hoist tools or equipment, unless explicitly certified for such use.
Need help?
Do you have a question about the 00432 and is the answer not in the manual?
Questions and answers