Low Power Alert Range
Set the power range that will trigger a low power alert. Default = 10-30%.
Low Power Alert Flash Number
You can program the battery-free scanner's LEDs to flash up to 9 times for the low
power alert. If the
with each flash. To set the number of low power flashes, scan the barcode below
and then scan a digit (1-9) barcode from the
page 311, then Save. Default = 3 flashes.
Interval Between Flashes
Set the length of time, in seconds, between the LED flashes for a low power alert. To
set the interval, scan the barcode below and then scan a digit (1-9) barcode from
the
between flashes.
Low Power Alert Repeat
Set how many times you want the low power flash pattern (flashes and intervals) to
repeat. To set the number, scan the barcode below and then scan a digit (1-5)
barcode from the
= 1.
Xenon XP User Guide
*Low Power Alert 10-30%
Low Power Alert Beep
Programming Chart,
Programming Chart,
(page 52) is on, a double beep will sound
Low Power Alert Flash Number
beginning on page 311, then Save. Default = 2 seconds
Interval Between Flashes
beginning on page 311, then Save. Default
Low Power Alert Repeat
Low Power Alert 10-50%
Programming Chart,
beginning on
51