Connect with RS485
A Xenon scanner or cordless base can be connected for an IBM POS terminal
interface.
1. Connect the appropriate interface cable to the device, then to the computer.
Note: The power supply must be ordered separately, if needed.
2. If you are connecting a CCB01-010BT/CCB01-010BT-BF or CCB-H-010BT/
8
Corded Xenon XP Scanner RS485 Connection:
CCB-H-010BT-BF base horizontally, make sure the cables are secured in the
wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface. If you are connecting a CCB-H-010BT/CCB-H-010BT-BF
Base vertically, see
Mount a CCB-H-010BT/CCB-H-010BT-BF Charge Base
page 10.
Xenon XP User Guide
on