Number of LED Flashes
If you have silenced the scanner's beeper, you may set the number of times the
LED flashes when reading barcodes. Default = 1 LED Flash.
Note: If you have set
override the LED Flash settings. In that case, scan the LED Solid Off barcode to turn
off this feature, then scan the LED Flash code you wish to use.
LED Flash Rate
If you have silenced the scanner's beeper, you may set the how quickly the LED
flashes when reading barcodes. Default = Fast Flash.
120
LED Solid (No Flash)
* 1 LED Flash
10 LED Flashes
* Fast Flash
Slow Flash
(page 121), to anything but Off, that setting will
5 LED Flashes
25 LED Flashes
Medium Flash
Xenon XP User Guide