Base Power Communication Indicator; Base Charge Status; Low Power Alerts - Honeywell Xenon XP 195 Series User Manual

Base Power Communication Indicator

To display the power indicator on a base or an Access Point, scan the Base Power
Communication Indicator On barcode. To turn off the power indicator, scan the
Off barcode. Default = On.
* Base Power Communication

Base Charge Status

When charging the base indicates the progress while the scanner resides in the
base.
LED
Green On
Green Slow Blink
Green Fast Blink
Yellow Fast Blink
Note: The number of scans was measured with a clearly printed UPC code in good light. The
approximate number of scans varies with changes in label quality, Symbology, and
environmental factors.

Low Power Alerts

Note: Low Power Alerts are only supported by battery-free scanners Xenon XP 1952g-BF
and Xenon XP 1952h-BF.
Low power alerts allow you to customize battery-free scanner LEDs to flash in
different patterns when the charge level is low. Use the barcodes that follow to
customize the settings for the power range being configured, the number of
flashes per alert, the interval between flashes, the number of alerts, and the
interval between alerts. The beeper can also be set to silent, or to sound with the
flash patterns.
50
Indicator On
Charge Level
100%
50-99%
30-50%
0-30%
Base Power Communication
Indicator Off
Approximate Expected
Scans (see note)
450
200
100
Charging, do not scan
Xenon XP User Guide