Honeywell Xenon XP 195 Series User Manual page 314

•
•
Is the barcode displayed but not entered into the application?
The barcode is displayed on the host device correctly, but you still have to press a
key to enter it (the Enter/Return key or the Tab key, for example).
•
The scanner won't read your barcode at all.
•
•
296
Aren't coated with frost or water droplets on the surface.
Are enabled in the base or Access Point to which the scanner connects.
You need to program a suffix. Programming a suffix enables the scanner to
output the barcode data plus the key you need (such as "CR") to enter the data
into your application. Refer to
information.
Scan the sample barcodes in the back of this manual. If the scanner reads the
sample barcodes, check that your barcode is readable.
Verify that your barcode symbology is enabled (see
Prefix/Suffix Overview on page 125 for further
Chapter 8).
Xenon XP User Guide