Watts AERCO Benchmark BMK5000 Operation And Service Manual page 167

Benchmark Platinum-Edge [ii]: Operation-Service Manual
CHANGE LOG
Change Log:
Date Description
Rev F:
DIR 18-19: Added note to turn AERtrim OFF before proceeding
with combustion calibration (Section 4.4.1 and 4.4.2, pages 39
and 45).
5/25/2020
Added Benchmark 5000N
Clarified reason for "Dual Fuel" column in Table 4.1
Added wiring schematics, Section 11.
Revised BST Implementation instructions, Section 7.3.
Rev G:
Revised intro to Combustion Calibration regarding Low NOx,
Section 4.5.
DIR 20-05: Replace BMK 5000/6000 Pilot Burner (29700) with
P/N 66026, Sections 4.4 and 8.2.1 ang 8.3. Revised front and
rear refractory instructions, Section 8.9. (ref PIR 1608-3).
DIR 20-23: Revised Combustion Calibration values for BMK
4000 & 5000N for both Natural gas (Section 4.5.1) and Propane
8/20/2020
(Section 4.5.2).
Added BMK 4000 & 5000N tables to Section 3.4: Start/Stop
Levels.
Added removal of air filter bag to startup procedure, Section 4.1
(ref ECN 1687).
Updated Figure 7.2
Updated BMK4000-5000N Schematic drawings, Section 11.3.
Revised Figure 8-1d, Ignitor-Injector orientation, Section 8.2.
Rev H:
12/20/2022
Added values for BMK 750/1000 Dual Fuel models, Sections 3.3,
3.4.1, 4.5.1, 4.5.2, 5.2.1, 5.3.1.
Rev I:
12/20/2022
Replaced images for 68096 & 68097
Rev J:
1/25/2023
In Table 4-4, corrected the gas pressure range for BMK1000P.
© AERCO International, Inc., 2020
OMM-0137_J •
12/20/2022
BST, BAS and Field Wiring, Section 7.2
:
Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST
Changed By
Linley
Thobourne &
Chris Blair
Chris Blair
Chris Blair
Lisa Weiss
Lisa Weiss
Page 167 of 167