Exposure System - Canon GP335 Service Manual

CHAPTER 14 TROUBLESHOOTING
B. Exposure System
1 Routing the Scanner Drive Cable
Route the cable from [1] through [9]; then, go to the next item, "Adjusting the Mirror Position."
[2]
Fit the mirror
positioning tool
[9]
38∼39mm
14-10
Loosen the set screws
to free the pulley.
[5]
Figure 14-209
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Set
screws
[7]
Put the steel ball into the
hole in the pulley.
Wind the cable 3.5
times inwardly and
4.5 times outwardly;
then, fit the
pulley clip.
Steel ball
[8]
[6]
[3]
Pulley clip
[1]
[4]
[2]