Canon GP335 Service Manual page 339

8. Low-Voltage Power Supply Cooling
Fan (FM10, FM11)
1) Remove the rear cover.
2) Disconnect the connector [1], and
disengage the hook [2]; then, detach the
fans (FM10, FM11).
Top view
[4]
[3]
Power cord
[1]
Figure 10-544
Caution:
When mounting the fan, be sure that the
marking (arrow indicating the direction
of air current) and the marking on the fan
will match.
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 10 EXTERNALS/AUXILIARY MECHANISMS
FM10
FM11
[2]
9. Reader Cooling Fan (FM12, FM13)
1) Remove the left cover.
2) Free the harness [2] from the wire saddle
[1], disconnect the connector [3], and
remove the screw [4]; then, detach the
fans (FM12, FM1).
FM13
[4]
[1]
Figure 10-545
Caution:
When mounting the fan, make sure of
the following:
• The direction of air current is as
indicated.
• The harness is retained by the wire
saddle.
Direction of
air current
[3]
[4]
[2]
10-31
FM12