Basic Expansion Kit - Canon GP335 Service Manual

CHAPTER 11 SYSTEM INTEGRATION
A. Basic Expansion Kit
1. Removing the Basic Expansion Kit
1) Check to make sure that the Communication
Memory lamp is off; then, turn off the main
power.
MEMORY TX/RX lamp
COPY
Figure 11-301
2) Remove the rear cover and the flywheel.
Flywheel
Screws
Screw
Figure 11-302
11-8
FAX OPTIONS
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
3) Remove the five screws, and detach the
extension case cover.
Extension case cover
Scares
Screws
Figure 11-303
4) If the fax board is installed, disconnect the
connector shown in the figure.
Extension unit
Fax board
Figure 11-304
Connector