Canon GP335 Service Manual page 366

CHAPTER 12 INSTALLATION
No.
5 Tap lightly on the top of the toner
cartridge so that toner falls in to the
developing assembly.
6 Push in the black cover of the
developing assembly back to its
initial position.
• Check to make sure that the
toner cartridge has separated
from the developing assembly.
7 Detach the toner cartridge.
8 Push in the developing assembly
until it stops.
9 Turn the developing assembly
locking lever in the direction of the
arrow to lock the developing
assembly in place.
Be sure to perform C. "Stirring the
Toner."
12-8
Work
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Developing assembly
locking lever