Configuration - Panasonic KX-TD500 User Manual

DSS Console Features

5.1 Configuration

5.1.1 Configuration
With a Directed Station Selection (DSS) Console, you can make or transfer calls and access
system features with the touch of a button. The DSS Console must be connected to the
Panasonic KX-TD500 System and paired with a PT (Proprietary Telephone). System
Programming is required to designate the extension number of the paired PT. With a paired
telephone, you can carry out the following operations using the DSS Console:
• Direct access to an extension (Direct Station Dialing)
• Quick access to an outside party (One-Touch Dialing)
• Quick access to a system feature (One-Touch Access for System Features)
• Easy transfer to an extension (Call Transfer)
The above functions are enabled simply by pressing buttons on the console which are pre-
programmed as function buttons by Station Programming.
Panasonic KX-T series DSS Consoles are categorized as follows:
KX-T7240
KX-T7040
KX-T7440 DSS Console (66-DSS buttons)
KX-T7441 DSS Console for Attendant (48-DSS buttons, ANSWER button,
Conditions
• The DSS Console and the PT should be placed side by side on your desk.
• Up to 8 DSS Consoles can be connected to a PT.
• A Single Line Telephone cannot be paired with the DSS Console.
• For System Programming, please refer to the Programming Guide of the KX-TD500
System.
Programming Guide References
• 4.4 DSS Console
– Paired Extension
– [DSS Console 1-8] Port No.
– [DSS Console 1-8] Model
– DSS Key
– PF Key
502
DSS Console (32-DSS buttons, 16-PF buttons)
RELEASE button)
User Manual