Panasonic KX-TD500 User Manual page 329

Digital super hybrid system
Hide thumbs Also See for KX-TD500:
Table of Contents

Advertisement

Trunk Access – Trunk Group
PT and SLT
8
Lift the handset
For PT: Press CO assigned
or press
For SLT, PT: Dial 8 and the trunk
SP-PHONE/MONITOR.
The selected CO indicator light turns green.
You may press a G-CO button directory
without first going off-hook.
Conditions
[General]
• Class of Service (COS) programming
COS programming determines the trunk group available for each extension user <Section
2.4 Class of Service (COS), "Trunk Group Setting" in the Programming Guide>.
All PTs in the system have one L-CO button by default.
• Flexible CO Button Assignment
A flexible CO button can be assigned as an S-CO, G-CO or L-CO button by Station, User
or System Programming as follows:
Button Type
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
User Manual
(CO)
For PT
trunk
For SLT, PT
group no.
as Group-CO.
group number
(01 through 48).
Assignable parameters
A specific outside line is assigned.
A trunk group is assigned.
All outside lines are assigned.
Station Features and Operation (PT/SLT)
phone no.
Dial tone
Dial the
phone number.
The display shows the phone number.
Talk.
Hang up or press
SP-PHONE/
MONITOR.
329

Advertisement

Table of Contents
loading

Table of Contents