Station Programming
2.2.14 Ringing Tone Selection for INTERCOM Button
Allows you to assign a ringer frequency to the INTERCOM button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
DPT
INTERCOM
Press INTERCOM.
The display shows the current
status
The display shows the selected tone type number and you hear
the selected tone until the STORE button is pressed.
<DPT Display Example>
Tone Type-X
If you want to change the tone type, enter another tone type
number.
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• The default is Ringing Tone Type 3.
96
INTERCOM
Enter the tone type number
Press INTERCOM again.
(1 through 8).
(-x:tone type number)
AUTO DIAL
tone type no.
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
STORE
User Manual