Account Code Entry - Panasonic KX-TD500 User Manual

4.3.2 Account Code Entry

An Account Code (max. 10 digits) is used to identify incoming and outgoing CO calls for
accounting and billing purposes. The account code is appended to the "Station Message Detail
Recording (SMDR)" call record. For incoming CO calls, account code entry is optional. For
outgoing CO calls, you may be required to enter an account code. This depends on your
Account Code Entry mode determined by System Programming on a "Class of Service
Entering account codes before dialing
7230 / 7235 / 7433 / 7436
S1
Lift the handset or press Press ACCNT (S3).
SP-PHONE/MONITOR.
<PT Display Example>
Enter ACCNT Code
CO
phone no.
Press CO. Dial the phone
number.
One of the dial tones. Refer to the
*
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
Confirmation tone
and dial tone
* One of the dial tones. Refer to the
Class of Service (COS) is used to define the features which are allowed for a group of extensions.
*1
User Manual
ACCNT
S2 S3
Dial tone 3*
Tone List in the Appendix.
" "
(Account)
For PT
4 9
For SLT, PT
For PT: Press Account
(flexible button).
For SLT, PT: Dial 49.
CO
line access code
Press CO or enter a line
access code
(9 or 801 through 848).
Tone List in the Appendix.
" "
Station Features and Operation (PT/SLT)
account code
Enter an account code
(10 digits max., 0...9).
account code
Enter an account code
Dial tone 3*
(10 digits max., 0...9).
If you dial a feature number,
you hear no tone.
phone no.
Dial the phone number.
" basis.
*1
Dial #. Confirmation tone
and dial tone
Dial #.
159