User Programming
Programming
Display PT
0
1
0
Dial 010.
<PT Display>
010 DISA CODES
Repeat these steps
DISA User Code
Press →.
Enter a DISA
User Code.
<To end:>
END
Press END.
Conditions
• The KX-TD500 System can store up to 32 programmable DISA user codes with a COS
level for each. Each code should be unique.
User Manual References
• 4.3.26 Direct Inward System Access (DISA)
144
NEXT
Press NEXT.
<PT Display>
Location NO?→
COS no.
Enter a COS number
(1 through 96).
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
Enter a location number
(01 through 32).
To enter location number 1, you
can also press NEXT.
<PT Display Example>
1:Not Stored
<To continue:> [When SELECT is pressed]
STORE
NEXT
Press STORE.
PREV
SELECT
Press NEXT or
PREV or SELECT.
location no.
location no.
Enter the desired
location number
(01 through 32).
User Manual