Panasonic KX-TD500 User Manual page 141

Programming
Display PT
0 0 9
Dial 009.
<PT Display>
009 QUICK DIAL
Repeat these steps
desired no.
Enter a desired number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
<To end:>
END
Press END.
Conditions
• There is maximum of eight location numbers (Quick dial 1-8).
A maximum of 24 digits, consisting of 0 through 9, , and # keys, and the FLASH, PAUSE,
SECRET and "-" (hyphen) buttons can be assigned to a quick dial number.
• Before programming this program, a feature number for each location should be
programmed by System Programming <Section 2.3 Numbering Plan in the Programming
Guide>.
User Manual
NEXT
Press NEXT.
<PT Display>
Location NO?→
<To continue:> [When SELECT is pressed]
STORE
Press STORE.
Press NEXT or
PREV or SELECT.
location no.
Enter a location number
(1 through 8).
To enter location number 1, you
can also press NEXT.
<PT Display Example>
1:Not Stored
NEXT
location no.
Enter the desired
PREV
location number
(1 through 8).
SELECT
User Programming
141