Panasonic KX-TD500 User Manual page 119

Conditions
• There is a maximum of 1000 speed dial numbers per tenant. However, this can be changed
by System programming. System supports a maximum of 2000 speed dial numbers, being
shared among up to 8 tenants. Each speed dial number has a maximum of 24 digits. The
valid characters are 0 through 9, , and # keys, and the FLASH, PAUSE, SECRET and
"-"(hyphen) buttons.
—To store the flash signal, press FLASH.
Notes
• The stored flash will only be effective during an established call. (Please refer to
"External Feature Access" in Section "1.12 Conversation Features" of the Features
Guide.)
—To store a hyphen, press the "—" button.
—To store a pause, press PAUSE.
of the Features Guide.)
– To prevent displaying all or part of the number, press SECRET before and after the
confidential parts of the number. (Please refer to "Secret Dialing" in Section "1.3
System Features" of the Features Guide.)
• If you are storing an external number, enter the line access code (default=9, 801 through
848) before the number. When dialing, a pause is automatically inserted after the code.
• If you are storing an account code, enter the account code before the line access code.
(Please refer to "Account Code Entry" in Section "1.3 System Features" of the Features
Guide.)
• It is possible to store a number consisting of 25 digits or more by storing it in two speed dial
numbers. The line access code should be stored in the first speed dial number.
• To display parts of the number which have scrolled off the display, press
• Program [002] "System Speed Dialing Name Set" is used to name the speed dial numbers.
• CO line access code must be placed before placing secret dial code 'S' or '[.'
User Manual References
• 4.3.73 System Speed Dialing
User Manual
(Please refer to "Pause Insertion, Automatic" in Section "1.7 Dialing Features"
User Programming
or .
119