Panasonic KX-TD500 User Manual page 225

Digital super hybrid system

Hide thumbs Also See for KX-TD500:

Table of Contents

To talk to the original party while holding the third party

Flash the switchhook.

To put both parties on hold

For an ICM type PT, this operation is available only when at

least one party is on a CO line.

For a DN type PT, this operation is available only when the

extension user established the conference call using two

different line access buttons. (Not available when only one

button is used.)

• Conference call arrangement

A conference call can be one of the following three arrangements:

1-inside and 2-outside; 2-inside and 1-outside; and 3-inside.

• Conference trunk

Up to eight conference calls are available at a time by default. If optional TSW Conference

Expansion card is installed, up to 64 conference calls are available at a time.

• Executive Busy Override, Privacy Release

A 3-party conference call is also established by Executive Busy Override or Privacy

• Confirmation tone

When a 2-party call is changed to a 3-party conference call and vice versa, a confirmation

tone is sent to all three parties. Eliminating the tone is programmable.

Pressing a CO button which is not in the conference, allows you to exit from the conference

Confirmation tone

Talk to the original party.

Station Features and Operation (PT/SLT)