Panasonic KX-TD500 User Manual page 128

User Programming
Programming
Display PT
0 0 5
Dial 005.
<PT Display>
005 FLEXIBLE CO
To program another CO button of the same extension port:
Repeat these steps
CO
Press CO which is changed
to another button.
The display shows the contents
pre-assigned to the button.
<PT Display Example>
CO-10101
To program another extension port:
SELECT
Press SELECT.
<To end:>
END
Press END.
128
NEXT
Press NEXT.
<PT Display>
EXT NO? →
button code
Enter a button code. Enter parameters, if required.
To change the parameter, press CLEAR
and enter the new parameter.
extension no.
Enter an extension number
(3 or 4 digits).
extension no.
Enter an extension number
(3 or 4 digits).
To enter the lowest extension
number, you can also press NEXT.
<PT Display Example>
PT-PGM Mode
parameters
Press STORE.
Repeat these steps.
Go to "Repeat these steps"
above.
STORE
User Manual