Panasonic KX-TD500 User Manual page 64

Station Programming
Direct Station Selection (DSS) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a DSS button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as a DSS button.
<PT Display Example>
EXT
CLR
<PT Display Example>
EXT xxxx
CLR
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• DSS buttons are provided on a DSS Console without default setting. You can assign the
desired extension number or feature on each DSS button from the paired PT.
• You cannot enter non-existent extension numbers.
64
1
extension no.
Dial 1. Enter the extension number
(3 or 4 digits).
(-xxxx:extension number)
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
User Manual