Flash - Panasonic KX-TD500 User Manual

Station Features and Operation (PT/SLT)

4.3.37 Flash

You can disconnect the current call and make another call without hanging up.
PT
While hearing any tone, dialing, or talking;
FLASH
Press FLASH.
Conditions
•
Flash or External Feature Access
Pressing the FLASH button on a PT results in either sending Flash signal (External Feature
Access) or disconnecting the current call (Flash). This is determined by System
Programming <Section 2.8 System Option, "3. FLASH button operation while CO talking"
and "4. FLASH button operation when "Don't release the trunk" is selected at #3" in the
Programming Guide>.
•
Pressing the FLASH button re-starts the conversation duration, outputs an SMDR record
and checks toll restriction level again.
Programming Guide References
• 2.8 System Option
– FLASH button operation while CO talking
– FLASH button operation when "Don't release the trunk " is selected at #3
• 3.2 Trunk Group
– Disconnecting Time
Features Guide References
1.12 Conversation Features
• External Feature Access
• Flash
User Manual References
• 4.3.35 External Feature Access
270
phone no.
Dial the phone number.
Dial tone
User Manual