Panasonic KX-TD500 User Manual page 187

Digital super hybrid system
Hide thumbs Also See for KX-TD500:
Table of Contents

Advertisement

Conditions
• Types of calls which are forwarded by this feature are:
Outside calls
Intercom calls Extension;
• Class of Service (COS) programming
COS programming <Section 2.4 Class of Service (COS), "Incoming Group FWD" in the
Programming Guide> determines the extension that can perform this feature.
The Call Forwarding setting extension varies depending on the following three modes:
Disable:
Disables this feature.
Own Group(s):
Enables forwarding all calls to other Incoming Groups or Extension Groups. Only its own
group(s) can be set as the Call Forwarding setting extension.
Any Group:
Enables forwarding all calls to other Incoming Groups or Extension Groups. Any group can
be set as the Call Forwarding setting extension.
• Forwarded call is not forwarded furthermore
There can be only one stage of Call Forwarding. If a call is forwarded to an extension in
Call Forwarding mode, the call is not forwarded furthermore.
• Confirmation Tone
A confirmation tone is sent to the extension user before being connected to the caller.
Eliminating the tone is programmable <Section 2.8 System Option, "9. Confirmation tone
for Call Pickup, Paging, Paging-Answer, TAFAS-Answer, Hold Retrieve and Call Park
Retrieve" in the Programming Guide>.
• Group FWD button
Group FWD button can be assigned to a flexible (CO, DSS) button by Station, User or
System Programming.
• Distinctive Dial Tone
When this feature is assigned to the extension, the extension user may hear a distinctive dial
tone (dial tone 2) after going off-hook depending on System Programming <Section 2.8
System Option, "15. Special dial tone after setting feature" in the Programming Guide>.
• Assignable destination is FDN of Incoming Group or Extension Group.
If "DIL 1:N" is specified in "Group Type" setting of Incoming Group, this feature does not
work.
• Regarding the PT with the Group FWD button, if Incoming Group FWD feature is assigned
to the PT extension, the Group FWD indicator lights in red.
User Manual
Call Type
Direct In Lines (DIL);
Direct Inward Dialing (DID);
Direct Inward Dialing (DID) (ISDN);
Direct Inward System Access (DISA);
Intercept Routing;
Multiple Directory Number (MDN);
TIE;
Transfer
Transfer
Station Features and Operation (PT/SLT)
187

Advertisement

Table of Contents
loading

Table of Contents