Panasonic KX-TD500 User Manual page 76

Station Programming
Secondary Directory Number (SDN) Button (Assignment)
Allows you to assign a Flexible (CO) button as an SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
(CO)
Press the desired Flexible
(CO) button you wish to
assign as an SDN button.
<PT Display Example>
SDN—
CLR
<PT Display Example>
SDN—xxxx
CLR
To erase an incorrect entry, press the CLR (S2) button or
the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the
Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• An SDN button should have its associated PDN button of another extension. This
assignment is available for extensions on which at least one PDN button is already assigned
(DN type PT). Otherwise, the SDN button dose not function.
• Up to three different SDN buttons can be assigned to a PT.
• Up to eight SDN buttons per PDN button can be assigned to eight different PTs respectively.
76
extension no. of the
7 5
owner extension
Enter the extension number
Dial 75.
(3 or 4 digits) of the owner
extension.
(-xxxx:extension number)
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
User Manual