Panasonic KX-TD500 User Manual page 135

Programming
Display PT
0 0 7
Dial 007.
<PT Display>
007 CALLER NAME
Repeat these steps
Caller ID Name
Enter a Caller ID Name.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
<To end:>
END
Press END.
Conditions
• Up to 1000 Caller ID Names per tenant, 2000 per system, can be assigned. Each name
corresponds to a Caller ID Code programmed by [006] "Caller ID Dial Set."
• A Caller ID Name cannot be assigned if the corresponding Caller ID Dial is not assigned.
• For entering characters, please refer to Section "2.2.17 Station Speed Dialing Number/
Name Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only]."
User Manual
NEXT
Press NEXT.
<PT Display>
Location NO?→
<To continue:> [When SELECT is pressed]
STORE
Press STORE.
Press NEXT or
PREV or SELECT.
location no.
Enter a location number
(000 through 999).
To enter location number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
NEXT
location no.
Enter the desired
PREV
location number
(000 through 999).
SELECT
User Programming
135