Station Programming
Group-CO (G-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Group-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as a G-CO button.
<PT Display Example>
TRK GRP-
CLR
To erase an incorrect entry, press the CLR (S2)button or the TRANSFER (CLEAR)button.
(The TRANSFER button becomes the CLEAR button in the Station Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• A G-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making or receiving a call.
68
trunk group no.
Dial #.
Enter the trunk group
number
(01 through 48).
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
User Manual