Advertisement
1/4" Drive Ratchet, 10 mm Socket
N
*Remove the (2) 10 mm nuts and (1) 10 mm bolt securing the fuse panel to the metal dash brace.
O
T
E
Pull Here to
Separate
Phillips Screwdriver, Trim Tool
N
*Remove the (3) phillips screws securing the steering column shroud (1 underneath and 2 behind the steering wheel). Turn the
O
steering wheel for access.
T
*Release tilt steering wheel adjuster lever.
E
*Pull down to separate (Use trim tool, if necessary) and remove the lower steering column shroud from the vehicle.
**NOTE: To access screws, insert key and turn to the ACC position, in order to prevent the steering wheel from locking.
HYUNDAI Genuine Accessories (Vehicle Disassembly)
10 mm Bolt
10 mm Nuts
Revision Date
5/2/2012
Phillips
Screws
Page 6 of 29
7
8
Advertisement
