Advertisement
HYUNDAI Genuine Accessories (General Procedures)
T-Tap Installation Procedure
Factory wire harness colors are
subject to change, please use the
specified pin # in the harness
connector to identify the correct wire
for T-Tap installation.
1. Place T-Tap on vehicle wire.
NO GOOD
NO GOO D
Disconnecting Connectors
When disconnecting connectors, grasp the connectors, not
the wires.
Wire Colors
When a two-color wire is listed, the first color indicates
the base color of the wire, the second color indicates the
color of the stripe. For example: Black/White
Striped Wire
Black
(Base Color)
White
(Stripe Color)
Spade Terminal
Pointed UP
INCORRECT
2. Using pliers, close and crimp
T-Tap around vehicle wire.
Solid Wire
Black
Revision Date
CORRECT
Spade Terminal CENTERED
Inside Connector
**Extreme care must be taken to ensure that the male spade
terminal is inserted into the T-Tap properly.
Locking Connectors
When locking connectors, listen for a click indicating
they are securely locked.
Connector Diagrams
Connector diagrams may be shown on the harness side or the
terminal side, extreme care must be taken to verify proper termi-
nal location before a T-Tap connection is made.
5/2/2012
Spade Terminal
Pointed DOWN
INCORRECT
3. Insert harness wire with
male spade terminal end
into the T-Tap.
Terminal End View
Harness End View
Page 3 of 29
Advertisement
