Advertisement
Pressure
Clips
N
*Reinstall the driver's side dash end cap panel by engag-
O
ing the (4) pressure clips.
T
E
Pressure Clips x 3 (Sedan Models)
Pressure Clips x 5 (Coupe Models)
Retaining Tab
(Coupe Model)
N
*Reinstall the driver's side front door step sill trim by engag-
O
ing the (3) pressure clips (Sedan Models) or (5) pressure
T
clips and (2) retaining tabs (Coupe Models).
E
HYUNDAI Genuine Accessories (Vehicle Reassembly)
Pressure
Clips
Retaining Tab
(Coupe Model)
Push Clip
Pressure
Clip
Phillips Screwdriver (if applicable)
N
*Reinstall the driver's side kick panel by engaging the (1)
6
O
upper push clip and (1) pressure clip.
T
*Reinstall the hood release lever.
E
*Secure the hood release lever with the (1) phillips screw (if
equipped).
*Reinstall the weatherstrip near the driver's side kick panel.
OE Transmitter Envelope
"Contained in this envelope are the original transmitters for your vehicle's remote
keyless entry system. Your vehicle has been equipped with a Hyundai Remote
Start System. The transmitters provided with your Hyundai Remote Start System
are to be used in place of the original transmitters. The original transmitters must
not be used to operate the locks on a vehicle equipped with the Hyundai Remote
Start System. The original transmitters can cause the vehicle's alarm system to
falsely activate."
8
N
*Place both OE transmitters into the provided white
O
envelope.
T
*Place OE Transmitter Envelope, Owner's Guide and the
E
Quick Reference Guide into the vehicle's glove box.
Revision Date
5/2/2012
Phillips Screw
(If Equipped)
Hood
Release
Lever
7
Owner's Guide
&
QRG
9
Page 23 of 29
Advertisement
