Features - Extron electronics DTP2 T 203 User Manual

Features

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Transmits DisplayPort, HDMI, control, and analog audio up to 330 feet
(100 meters) over a shielded CATx cable — The DTP2 T 203 provides high reliability
and maximum performance on an economical and easily installed cable infrastructure.
Inputs: one DisplayPort, two HDMI, and one 3.5 mm stereo mini jack for audio
Output: one DTP2 twisted pair output on RJ-45
Supports computer and video resolutions up to 4K/60 @ 4:4:4 — Support of
4K/60 at 4:4:4 chroma sampling requires connection to a matching DTP2 product.
Auto-switching between inputs — Auto‑switching allows for intuitive operation in
collaboration spaces. Multiple switching priority modes are available, including
last‑connected input and user‑selectable priority.
Analog stereo audio embedding — Analog stereo audio signals can be selectively
embedded onto the digital video output signal and transported over DTP. The
DisplayPort and HDMI inputs can be set to pass the embedded digital audio or the
DTP2 T 203 can automatically embed the analog audio onto the HDMI/DisplayPort
signal.
Supports DisplayPort SST - Single Stream Transport data rates up to 21.6 Gbps
Supported HDMI 2.0b specification features include data rates up to 18 Gbps,
HDR, Deep Color up to 12-bit, 3D, and HD lossless audio formats.
Support for HDR – High Dynamic Range video — Enables greater contrast range
and wider color gamut by providing the necessary video bandwidth, color depth, and
metadata interchange capability for HDR video.
HDCP 2.3 compliant — Ensures display of content‑protected 4K video media and
interoperability with other HDCP‑compliant devices.
Remote power capability with DTP2 products — For simplified installation, the
DTP2 T 203 can be remotely powered by a DTP2‑enabled product over the twisted pair
connection. It can also be configured to provide power to the connected DTP2 receiver
product.
Ethernet monitoring and control — Enables control and proactive monitoring over a
LAN, WAN, or the Internet.
Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for
optimal performance.
Compatible with CATx shielded twisted pair cable — The DTP2 T 203 fully
supports a maximum transmission distance of 330 feet (100 meters) for all compatible
resolutions when used with CATx shielded twisted pair cable. Shielded twisted pair
cabling with solid center conductor sizes of 24 AWG or better is recommended for
optimal performance.
DTP2 output is compatible with HDBaseT-enabled devices — The DTP2 output
can be configured to send video and embedded audio, plus bidirectional RS‑232 and IR
signals, to an HDBaseT‑enabled display.
Accepts additional analog stereo audio signals — The DTP2 T 203 accepts stereo
analog audio signals for simultaneous transmission over the same shielded twisted pair
cable.
Audio input assignment — The analog audio input can be assigned to any video
input, or it can be set to follow the input switch.
Bidirectional RS-232 and IR pass-through for AV device control — Bidirectional
RS‑232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
DTP2 T 203 • Introduction 2