Features Of The Transmitter Exsens(-I) And Sens(-I) - Extron electronics ExSens Instruction Manual

Instruction Manual
ExTox Transmitter ExSens(-I) and Sens(-I)
2

Features of the Transmitter ExSens(-I) and Sens(-I)

There are multiple tasks which need to be fulfilled when monitoring gases and va-
pours. The range covers the opportune warning before it comes to the release of
flammable substances, monitoring of concentrations of toxic gases at working plac-
es as well as controlling of production processes.
Due to modern sensor technique the ExTox-Transmitters of the Series ExSens(-I)
and Sens(-I) offer excellent solutions for nearly all thinkable applications. You find
our wide range of measuring gas and corresponding measuring ranges in the
Transmitter and Gas List on our Homepage www.ExTox.de.
All transmitters could be combined. Due to their modular construction accessories
and spare parts are mutually extensively interchangeable, which facilitates and en-
ables installation, adjustment and maintenance at low cost.
The transmitters issue the measuring signal via a 4-20 mA-output with linear curve.
The types ExSens-I and Sens-I also dispose of a digital RS-485 communication in-
terface. This offers the possibility of an automatic single man calibration of these
transmitters as well as further comfortable functions for configuration and monitor-
ing of the sensor functionality.
ExSens(-I)
The Transmitters of the ExSens(-I) Series are suita-
ble for use in hazardous areas of Zones 1 and 2.
Sens(-I)
The Transmitters of the Sens(-I) Series are suitable
for use under normal industrial conditions – mainly
outside hazardous areas.
Page 5 of 20