Other Connectors Configuration; 2-10.1 On Board Fan Connectors - SOLTEK SL-865G Manual

SL-865G / 865G-L

2-10 Other Connectors Configuration

This section lists out all connectors configurations for users' reference.

2-10.1 On Board Fan Connectors

JKB1
1
PS/2 Mouse
(on top)
PS/2 Keyboard
USB0
( port )
USB1 (port)
Fan1
1 JFSB1
JFSB2
1
1 JFSB3
1
3
RJ45 +12V Power
(on top)
USB2 (port)
USB3 (port)
Fan4
AGP 8X/4X
PCI 1
RTL
LJP1
8100C
PCI 2
ALC
1
PCI 3
CN3
PCI 4
1
CD-IN1
PCI 5
1
ALC
655
PCI 6
Audio1
COM2
1
1 1
Both Sensor and No-sensor Fan Connectors support CPU/AGP/Sys-
tem/Case cooling fan with +12V mode. When connecting the wire to
any Fan Connector, users should make sure that the red wire is for the
positive current and should be connected to pin +12V, and the black
wire is Ground and should be connected to pin GND.
A Hardware Monitor chipset is on board, with which users can install
a Hardware Monitor Utility and read the fan speed transmitted from the
sensor fan. Otherwise, users can read the fan speed from the "Hard-
ware Monitor Status" in BIOS.
A running Fan will send out 2 electric pulses per rotation of its fan
blade. A Sensor Fan Connector will count the electric pulses and send
the information to the System Hardware Monitor which in turn will work
out the fan rotation speed and display it on screen.
Main
Power
Intel
Intel 82865
865G
IDE2 IDE1
Li
Battery
JBAT1
FD1
1
Intel
1
ICH5
ATA2
Fan2
ATA1
LPC I/O
Winbond
RT1
W83627HF
NJ1
BIOS
Header USB3 Header USB4 Fan3
1
Sensor
+12V
GND
GND
Sensor Conn.
Fan Connector
Fan1, yellow, sensor
Fan Connector
Fan4, no sensor
Fan Connector
Fan2, yellow, sensor
Fan Connector
Fan3, yellow, sensor
32
Void
+12V
No Sensor