Menu Group - Setup - Cygnus 1 Ex Manual

Menu Group - Setup

Power Save
Bluetooth
Datalog
Comments
Auto-Log
User List
Set Time
Set Date
Gauge Info
Enable Features
Config
Cygnus 1 Ex Operating Manual
Sets the Power Saving Timer.
When the gauge is Idle, not taking measurements or being
used, to save battery power the screen brightness is reduced
and eventually the gauge is turned off.
Short = 2 minutes to Auto Turn Off
Normal = 5 minutes to Auto Turn Off
Long = 20 minutes to Auto Turn Off
Turns the Bluetooth connection On or Off.
Bluetooth can be used to make a connection to a Windows
computer for transferring data to CygLink.
Edit the list of Datalogger Comments.
Turn the Auto-Log feature On or Off.
Auto-Log will automatically log a stable thickness
measurement after a period of time if the measurement is
maintained.
Edit the list of Users and set Access Levels and PIN Codes.
Set the Time.
Set the Date.
Displays information about the gauge.
Gauge Variant
Serial Number
Firmware Versions
File System Space
Feature Code
Run Time
Battery Status
Enter in an Update Code to change the gauge variant or
enable additional gauge features.
Access gauge configuration settings. This is protected by an
Admin level password.
Gauge ID
Probe Gain Values
Languages
Page 79 of 91
®