Adding Comments - Cygnus 1 Ex Manual

2. Use the ◄►▲▼ navigation keys to
highlight the required measurement
point
3. You can also press the Jump To
function key to specify a specific
coordinate in the record. Pressing the
√ key to jump to the coordinates
entered.
4. Press the √ key or Select function
key to save and exit or press the X
key to cancel.

Adding Comments

There are eight 'text' comments that can be assigned to thickness measurement
points. These comments can be edited from the Setup menu group, see Menu
Group - Setup on page 79.
By having a list of pre-set comments, the user can quickly add comments by just
selected the ones that are appropriate, this also standardises the information you
want recording.
You can add a selection of Comments to any measurement point in the open
record.
In the Datalogging measurement
1.
screen, after logging a thickness
measurement, press the Comment
function key.
Cygnus 1 Ex Operating Manual
Page 59 of 91