Fig. 19: Connecting Electronic Drive Unit To Power Supply Pack - Pfeiffer Vacuum HiPace 800 Operating Instructions Manual

Installation
7
6
5
Fig. 19:
1 Power supply pack | Control unit with power supply pack
2 Turbopump electronic drive unit
3 DCin connection
4 Connection cable, e.g., PM 061 352 -T
Connecting electronic drive unit
1. Ensure the correct supply voltage.
2. Make sure that the power supply pack main switch is off prior to connection.
3. Use a suitable connection cable from the Pfeiffer Vacuum accessories range.
4. Insert the connecting cable into the connection "DCin" on the electronic drive unit and close the
5. Insert the connecting cable into the connection "DCout" on the power supply pack and close the
34/64
DC out
Connecting electronic drive unit to power supply pack
bayonet lock.
bayonet lock.
1 2
4
5 Connecting socket DCout
6 Mains connection ACin
7 Main switch
3
DC in