Accessories; Accessory Information; Ordering Accessories - Pfeiffer Vacuum HiPace 800 Operating Instructions Manual

13 Accessories
13.1 Accessory information
Fixing materials
Type-specific assembled packages, with centering ring and seal, ensure the secure fastening of the
vacuum pump. Optionally with splinter shield or protective screen.
Power supply packs and control units
Power supply packs for optimal voltage supply of Pfeiffer Vacuum products are characterized by their
compact size and adapted power supply with maximum reliability. Control units are used to check and
adjust operating parameters.
Cable and adapter
Mains, interface, connection, and extension cables provide a secure and suitable connection. Different
lengths on request
Venting accessories
A Pfeiffer Vacuum venting valve offers maximum operating and process security. Automatic control
through the integrated electronic drive unit of the turbopump.
Sealing gas supply
Sealing gas is used to protect the vacuum pump from dusty and corrosive processes, or excessive gas
throughputs. Sealing gas prevents the ingress of damaging substances into the motor and bearing area.
The supply is carried out either via a sealing gas valve or a sealing gas throttle without control.
Air cooling
For processes with low gas throughputs and good fore-vacuum pressure, air cooling can be used inde-
pendently of a water supply. Automatic control through the integrated electronic drive unit of the turbo-
pump.
Heating
Heating jackets enable the ultimate pressure to be reached more quickly during process cleaning. Auto-
matic control through the integrated electronic drive unit of the turbopump.
Backing pump control
The electronic drive unit of the turbopump enables useful control of backing pumps. Depending on the
backing pump used, different operating modes are available.
Integrated pressure measurement
Evaluation and control by the integrated electronic drive unit, independently of an additional power sup-
ply.
13.2 Ordering accessories
Selection field
Centering ring with multifunction coating, DN 200 ISO-K/-F
Centering ring with multifunction coating and integrated splinter shield, DN 200
ISO-K/-F
Centering ring with multifunction coating and integrated protection screen, DN
200 ISO-K/-F
Mounting kit for HiPace 800, DN 200 ISO-K, including coated centering ring
and bracket screws
Mounting kit for HiPace 800, DN 200 ISO-K, including coated centering ring,
splinter shield, bracket screws
Mounting kit for HiPace 800, DN 200 ISO-K, including coated centering ring,
protective screen, bracket screws
View the range of accessories for hybrid bearing turbopumps

Accessories

on our website.
Part number
PM 016 220 AU
PM 016 221 AU
PM 016 222 AU
PM 016 354 -T
PM 016 355 -T
PM 016 356 -T
53/64