Pictographs; Stickers On Product; Fig. 1: Position Of The Stickers On The Product - Pfeiffer Vacuum HiPace 800 Operating Instructions Manual

About this manual
Individual action step
A horizontal, solid triangle indicates the only step in an action.
► This is an individual action step.
Sequence of multi-part action steps
The numerical list indicates an action with multiple necessary steps.
1. Step 1
2. Step 2
3. ...
1.3.2 Pictographs
Pictographs used in the document indicate useful information.
1.3.3 Stickers on product
This section describes all the stickers on the product along with their meanings.
D-35614 Asslar
Mod.
P/N
S/N
Oil
n, f
Mass
Fig. 1:
1 Operating instructions note
2 Warranty seal
8/64
Note
Tip
Berliner Str. 43
HiPace 800
PM PXX XXX
Type 12
- - - - - - - -
IP 54
PM XXX XXX -T
TÜV Rheinland
49200 1/min, 820 Hz
C
UL / CSA 61010-1
1X.X kg
Made in Germany 2023/02
warranty seal
1
3
4
Position of the stickers on the product
Rating plate (example)
The rating plate of the turbopump is located on the lower part
of the vacuum pump.
Rating plate of the electronic drive unit
The rating plate of the electronic drive unit is located on its out-
US
side next to the LEDs.
Operating instructions note
This sticker indicates that this operating instructions must be
read before performing any tasks.
Protection class
The sticker describes protection class III for the product. The
positioning indicates the position for the ground connection.
Warranty seal
The product is sealed ex factory. Damaging or removing a war-
ranty seal results in loss of the warranty.
3 Information regarding ground connection
4 Rating plate of the turbopump
2