Setting The Date And Time - Icom IC-905 Basic Manual

Setting the date and time

D Setting the date
1. Open the "Date" screen.
» SET > Time Set > Date/Time > Date
2. Touch [+] or [–] to set the date.
3. Touch [SET] to save the date.
4. To close the DATE/TIME screen, push
several times.
D Setting the current time
1. Open the "Time" screen.
» SET > Time Set > Date/Time > Time
2. Touch [+] or [–] to set the current time.
3. Touch [SET] to save the time.
4. To close the DATE/TIME screen, push
several times.
NOTE: The backup battery for the internal clock
The IC-905 has a rechargeable Lithium battery
to back up the internal clock. If you connect the
transceiver to a power source, the battery is
charged, and it keeps the correct clock setting.
However, if you do not connect the transceiver to a
power source for a long period of time, the battery
will discharge. In that case, the transceiver resets
the internal clock.
The battery is charged while connecting to a power
source, whether the transceiver's power is ON or
OFF.
D Setting the UTC offset
1. Open the "UTC Offset" screen.
» SET > Time Set > UTC Offset
2. Touch [+] or [–] to set the UTC offset.
3. Touch to save the UTC offset.
4. To close the TIME SET screen, push
times.
9-1
9
CLOCK
several
8
9