Icom IC-905 Basic Manual page 66

8
SET MODE
The call log contents are shown below:
Contents
TX/RX TX
Date 2/28/2023 13:51:48
Frequency 438.010000
Mode DV
My Latitude 34.764667
My Longitude 135.375333
My Altitude 50.5
RF Power 20%
S meter (Blank)
RPT Call Sign JP3YHJ
TX Call Sign CQCQCQ
RX Call Sign (Blank)
RX Latitude (Blank)
RX Longitude (Blank)
RX Altitude (Blank)
Example
RX
2/28/2023 13:51:48
438.010000
DV
34.764667
135.375333
50.5
(Blank)
S0
JP3YHJ A
(Blank)
JA3YUA A/905
34.764667
135.375333
30.5
8-12
Descriptions
Transmission and reception
Date and time the call was started.
Operating frequency
Operating mode
( USB/USB-D/LSB/LSB-D/CW/CW-R/RTTY/RTTY-R/AM/AM-D/
FM/FM-D/DV/DD/ATV)
Your latitude (unit: degrees)
(+: North latitude, –: South latitude)
Your longitude (unit: degrees)
(+: East longitude, –: West longitude)
Your altitude (unit: meters) Records to one decimal place.
TX output power level
The relative signal strength of the receive signal (in 16 levels)
Repeater call sign (DV mode only)
TX Call sign (DV mode only)
RX Call sign/Note (DV mode only)
Caller's latitude, if sent. (unit: degrees)
(+: North latitude, –: South latitude)
Records only when you receive in the DV mode.
Caller's longitude, if sent. (unit: degrees)
(+: East longitude, –: West longitude)
Records only when you receive in the DV mode.
Caller's altitude, if sent. (unit: meters)
Records only when you receive in the DV mode.