Icom IC-905 Basic Manual page 30

3
BASIC OPERATION
Setting the frequency
D Band Edge Beep
Deleting a Band Edge
You can delete band edges you no longer need.
1. Open the "User Band Edge" screen.
2. Touch the desired band edge to delete for 1
second.
(Example: 7: 10000.000.000 – 10500.000.000 MHz)
3. Touch "Delete."
• The selected band edge is deleted, and returns to the
previous screen.
Entering a new Band Edge
You can enter new Band Edge frequencies into a
blank band edge line.
1. Open the "User Band Edge" screen.
2. Touch a blank band. (Example: 7)
3. Enter the lower band edge frequency, then touch
[ENT]. (Example: 10000)
Entry example: [1] [0] [0] [0] [0] [ENT]
4. Enter the upper band edge frequency, then touch
[ENT]. (Example: 10450.5)
Entry example: [1] [0] [4] [5] [0] [•] [5] [ENT]
• The entered band edge is saved, and returns to the
previous screen.
3-7