Table of Contents
Advertisement
8
SET MODE
Function
» SET > Function > Front Key Customize
[VOX/BK-IN]
[AUTOTUNE/RX>CS/AFC]
(Default: AUTOTUNE/RX>CS/AFC)
The function assignments for the
/
keys on the front panel can be changed.
L See page 8-7 about the functions.
» SET > Function > Remote MIC Key
[A]
[B]
[]
[]
The function assignments for the [A], [B], [▲], and [▼]
keys on the HM-243 speaker microphone can be changed.
L See page 8-8 about the functions.
Mode Select (Default:
✔
✔
Selects whether or not to enable to select the mode
by pushing the microphone's key that "MODE" is
assigned to.
L Displays "✓" when the mode is selectable.
» SET > Function
Keyboard Type
Sets the keyboard entry type to Ten-Key or Full Keyboard.
Full Keyboard Layout
Sets the on-screen keyboard layout to English,
German, or French.
Screen Capture [POWER] Switch
Assigns the Screen Capture function to
• OFF:
does not act as the Screen Capture key.
• ON:
acts as the Screen Capture key.
L When both "Screen Capture [POWER] Switch" and
"Screen OFF [POWER] Switch" are set to ON, pushing
displays the dialog to select "Screen OFF" or
"Screen Capture."
Screen Capture File Type
Sets the file format for the Screen Capture function to
PNG or BMP.
(Default: VOX/BK-IN)
/
and
(Default: Home CH)
(Default: VFO/MEMO)
(Default: UP (VFO: kHz))
(Default: DOWN (VFO: kHz))
SSB/
CW/
RTTY/
AM/
✔
✔
✔
FM/
DV/
DD/
ATV)
✔
✔
✔
(Default: Full Keyboard)
(Default: English)
(Default: OFF)
.
(Default: PNG)
REF Adjust
Adjusts the internal reference frequency.
L While synchronizing to the received GPS data, "REF
Adjust (Synchronizing to GPS)" is displayed, and you
cannot manually adjust the internal reference frequency.
To manually adjust, touch [Cancel Sync] to cancel the
GPS synchronization.
My Station
» SET > My Station
My Call Sign (DV)
The transceiver has a total of 6 memories to save
your own call signs for use in the DV mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
TX Message (DV)
The transceiver has a total of 5 memories to save
short messages for simultaneous transmission in the
DV mode.
Enter a message of up to 20 alphanumeric characters
for each memory.
L To transmit no message, select "OFF."
My Call Sign (DD)
The transceiver has a total of 6 memories to save
your own call signs for use in the DD mode. You can
enter a call sign of up to 8 digits. Also, a note of up to
4 characters, for operating transceiver type, area, and
so on, can be entered.
8-6
Advertisement
Table of Contents
