Transmitted-Light Base Tl Bfdf - Leica Z6 APO A User Manual

Transmitted-light Base TL BFDF

Standard delivery
The base is delivered with the adapter plate
installed. The selected stage (Leica IsoPro™
mechanical stage or Leica standard stage
10 447 269), and the focusing drive will have to
be mounted later.
Stage assembly
The Leica TL BFDF transmitted-light base can be
equipped with three different stages.
★ Leica IsoPro™ manual mechanical stage
Leica IsoPro™ automatic mechanical stage
★
Leica standard stage 10 447 269
★
Leica Z6 APO A / Z16 APO A
The selected stage is mounted on the base
before commissioning. You can switch between
the stages at any time with just a few hand
movements.
The following paragraph assumes use of the
base without the stage mounted. Disassembly
is performed in reverse order of the following
steps.
User Manual
Standard stage
1. Take the glass plate from the rectangular
gap in the standard stage.
2. Position the stage on the transmitted-light
base in such way that the four holes align
over those in the base.
3. Attach the stage to the base with the four
supplied hexagon-head screws.
4. Insert the glass plate back into the standard
stage.
31