Leica Z6 APO A User Manual page 34

Leica IsoPro™ Manual Mechanical Stage: Assembly (cont'd.)
Left or right operation
If the controls are to be mounted on the left-
hand side, the gear rod on the bottom side of
the mechanical stage must be unscrewed and
reattached in reverse.
1. Take the glass plate from the mechanical
stage and turn it around.
2. Change the gear rod from the left to the
right-hand side.
Leica Z6 APO A / Z16 APO A
Control assembly
1. Take the glass plate from the mechanical
stage and turn it around.
2. Attach the axis with the control buttons to
the desired side. The fastener snaps into the
mechanical stage magnetically.
3. Attach the axis with the two supplied hexa-
gon-head screws.
4. Attach the cover rail to the mechanical
stage.
User Manual
Mechanical stage assembly
1. Place the mechanical stage onto the base.
2. Pull the upper part of the mechanical stage
carefully towards the user, fixing the lower
part onto the transmitted-light base.
3. Attach the mechanical stage evenly to the
three threaded holes.
4. Now move the mechanical stage as far as it
will go in the direction of the column.
5. Insert the glass plate into the mechanical
stage.
34