Leica Tl St Transmitted-Light Base: Changing Bulbs - Leica Z6 APO A User Manual

Leica TL ST Transmitted-light Base: Changing Bulbs

Changing the halogen lamp
Before you change the lamp, it is abso-
lutely necessary to unplug the power
plug from the base to prevent the risk of elec-
tric shock!
The halogen lamp becomes very hot
during operation. Therefore, to avoid
being burned, let the base cool off for approx.
10 minutes after switching it off!
Do not touch new halogen lamps with
your bare fingers—this drastically redu-
ces the service life of the lamp!
Leica Z6 APO A / Z16 APO A
Changing Bulbs
1. Unscrew the two screws on the heat sink
and pull the heat sink out, along with the
lamp.
2. Carefully pull out the lamp and mount by
pulling them upwards.
3. Disconnect the lamp from the mount.
4. Insert the new lamp into the mount and
reinsert the lamp holder.
User Manual
Precautionary measures
When inserting the lamp, ensure that
the cables are inside the two metal
clamps. This prevents the cables from getting
caught during insertion.
66