Table of Contents
Advertisement
Leica LED3000 NVI™ (Near Vertical Illumination)
The intensity of the illuminator can be
adjusted in 10 increments.
The Leica LED3000 NVI™ can also be
controlled via the Leica Application Suite
(LAS) or the Leica SmartTouch.
The supported working distance is
between 50 mm and 150 mm.
Leica Z6 APO A / Z16 APO A
Use
The light of the Leica LED3000 NVI™ can
be very bright. Therefore, always switch
on the illuminator before you look through the
eyepieces!
1. Switch on the illuminator by briefly pres-
sing the
(ON/OFF) button.
The green LED on the upper left corner now
lights up.
User Manual
2. Adjust the brightness by briefly pressing
the
or
buttons.
3. Switch off the illuminator by briefly pres-
sing the
button.
80
Advertisement
Table of Contents
