Safety Instructions
Description
The individual modules fulfill the highest
★
requirements for observation and docu-
mentation with the Leica Z series.
Intended use
★
Refer to "Safety Concept" booklet.
Non-intended use
Refer to "Safety Concept" booklet.
★
Never use Z series macroscopes or their compo-
nents for surgical procedures (for example, on
the eye) unless they are specifically intended
for that purpose.
The instruments and accessories described in
this operating manual have been tested for
safety and potential hazards. The responsible
Leica affiliate must be consulted whenever
the instrument is altered, modified or used in
conjunction with non-Leica components that
are outside of the scope of this manual.
Leica Z6 APO A / Z16 APO A
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Place of use
★
Refer to "Safety Concept" booklet.
★
Electrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
Avoid large temperature fluctuations,
★
direct sunlight and vibrations. These condi-
tions can distort measurements and micro-
graphic images.
In warm and warm-damp climatic zones,
★
the individual components require special
care in order to prevent the build-up of
fungus.
User Manual
Responsibilities of person in charge of
instrument
Refer to "Safety Concept" booklet.
★
Ensure that:
The Z series macroscopes and accessories
★
are operated, maintained and repaired by
authorized and trained personnel only.
All operators have read, understood and
★
observe this User Manual, and particularly
the safety regulations.
Repairs, service work
Refer to "Safety Concept" booklet.
★
Only original Leica Microsystems spare
★
parts may be used.
Before opening the instruments, switch off
★
the power and unplug the power cable.
Touching the live circuit can cause injury.
★
5