Ergo binocular tube
Tools used
No tools required.
★
Prerequisite for the installation
When using the ergo binocular tube or
another tube, the Y video/phototube
must be used.
Preparations
1. Unscrew the positioning screw and remove
the protective cover.Assembling the tube
Leica Z6 APO A / Z16 APO A
Assembling
1. Push the tube into the dovetail ring and
rotate it slightly in both directions until the
positioning screw meshes with the guide
groove.
User Manual
2. While holding the tube only slightly, care-
fully tighten the positioning screw. It is
automatically brought to the correct posi-
tion.
27