Leica Z6 APO A User Manual page 39

Leica IsoPro™ Motorized Mechanical Stage: Assembly (cont'd.)
Mechanical stage for X-Y stage control
module
1. Plug the CTL2 plug of the mechanical stage
motor into one of the three available CTL2
interfaces.
2. Plug the CTL2 plug of the Leica PSC control-
ler into another CTL2 interface.
★ The third CTL2 interface is available for
connecting other instruments, such as the
Leica foot switch (10 447 398) or TL RCI™
transmitted-light base (10 446 352).
The 15-pin Sub-D interface is intended for
★
use with the Leica SmartMove™ controller
(11 501 197).
3. Plug a power cable into the socket provided
and into a grounded power socket.
Leica Z6 APO A / Z16 APO A
As soon as all instruments have been plugged
into the control box and it has been plugged
into the power supply, the mechanical stage
initializes and automatically drives to the mid
position.
4. Connect the PC (where applicable) and X/Y
Stage DCI Module (using a suitable USB
cable).
User Manual 39